Simulation

Test every change before you make it.

A simulation of your own line, learned from your production data, to answer “what if?” without risking a single shift.

packaging line 2 · seal temperature193.9 °C
reject limitstopstopnowpast 7 daysnext hour
Insight: where this week's output went
Stops this week
14
Main cause
Film changeover
Worst hour
First hour of night shift
Output vs target
−8%

Example · tap a view to explore

Live demo

Your SCADA tells you what's happening. Our AI tells you what's coming.

On top: a traditional SCADA screen for a conveyor motor, with live values and fixed-limit alarms. Below: the Hour Zero AI layer reading the same data. Turn on a fault in the “Fault simulation” box and watch the AI recognise it, name the cause and forecast failure while every SCADA value is still green. Simulated data.

Traditional SCADA what most plants already have: live values and fixed-limit alarms
MTR-01 · Conveyor Drive · Condition MonitoringOperator: DEMO  |  Runtime 00:00:00
Motor M1 · 7.5 kW · 460 V · 1760 rpm · IE3
ENCTBM1 7.5kW 460V 3~1760rpm 14A IP55VT1TO GEARBOX
STOPPED
Speed0rpm
Run cmd
Trip
Encoder OK
ISO zone A
Process values
Speed (encoder)0rpm
Speed setpoint60.0Hz
Drive output60.0Hz
Active power0.00kW
Motor load0%
Slip0.00%
Winding temp.34.0°C
Energy0.000kWh
Encoder freq.0.00kHz
Encoder count0inc
Vibration analysis · VT1 (DE bearing, radial)
Waveform
Spectrum (FFT)
Electrical & mechanical
Motor current
0510152025A
0.0A
Shaft torque
020406080N·m
0.0N·m
Vibration
0.00mm/s
Winding
34.0°C
Load
0%
Trend
Current 0–25 AVibration 0–10 mm/sWinding 0–120 °C
Drive control
Fault simulation
Alarm view
TimeClassMessage
00:00:00InfoDrive online · MTR-01
Connected · PLC_1 (simulated) · cycle 100 ms0 unacknowledgedSimulated data
Hour Zero AIIntelligence layer on top of your SCADA
Learned normal: 24 h · 12 signals Analysing live
Watching for patterns your SCADA can't see. Turn on a fault in the SCADA's “Fault simulation” box above.
Anomaly score
0NORMAL

Deviation from the learned healthy pattern across all signals, not single limits.

Root-cause diagnosis
  • Healthy operation97%
  • Shaft misalignment3%
  • Bearing outer-race defect (DE)0%
  • Rotor / coupling imbalance0%
  • Mechanical overload (jam)0%
Remaining useful life
> 12 mono degradation trend
1005020failure risktoday+30d+60d+90d
AI analysis

Recommended actions
  1. No maintenance required
  2. Next model review in 7 days
Ask the machine

Pick a question. Answers come from this motor's live data.

Virtual speed sensor
Encoder0
AI estimate0

Speed estimated from the motor-current signature agrees with the encoder within 0.3%.

Sound familiar?

Where it hurts today.

  • Every change to the line is a gamble on live production
  • Setpoints are tuned by trial and error
  • Nobody knows what happens if a machine or instrument fails
  • Investment decisions rest on gut feeling
What changes for you

Before and after.

  • Testing changes on the real lineTesting them on a simulation first
  • Trial-and-error setpointsBest settings found before you touch the line
  • “What if it fails?” unknownImpact of a failure known in advance
  • Guessing the paybackOutput, quality and energy forecast for each option
How we get you there

Three steps. No disruption.

  1. 01

    Learn your line

    We connect your machines and instruments and learn how they behave together.

  2. 02

    Build and validate

    A simulation of your line, checked against your own production history.

  3. 03

    Ask “what if?”

    Change speeds, setpoints, recipes or shifts and see the effect before you commit.

Questions

What clients ask us.

What kind of questions can it answer?

For example: what if we run 10% faster? What if this sensor fails or drifts? What setpoint gives the best quality for the least energy? Where is the bottleneck if we add a shift or a new product?

How accurate is the simulation?

It is learned from your own production data and checked against what really happened on your line before you rely on it. We show you how close it is, and it keeps improving as more data comes in.

Does it touch our real machines?

No. The simulation runs separately and only reads data. Nothing changes on the line until you decide it should.

Is our data safe?

Yes. We can run everything on an on-premise server inside your facility, on enterprise-grade cloud services with full encryption, or inside the cloud account you already use, under your own management and control. You own your data and the system.

Under the hood
  • Digital twin built from live and historical machine and instrument data
  • Physics-informed and machine-learning process models
  • What-if scenarios, setpoint optimization and failure simulation
Free consultation

Find out what AI can do for your business.

Book a free consultation. Tell us what's slowing you down and we'll show you where AI and automation will cut costs, reduce errors and help you grow.

  • Free, no commitment
  • Book online in two minutes
  • The right specialists on the call